This CNC shield V3 is used as a driving shield for engraving machines, fully compatible with UNO R3. So you just need to stack it onto the UNO R3 control board.
It has a total of 4-way pin slots for stepper motor drive modules to drive 4-channel stepper motors.
Each stepper motor only needs 2 IO ports, so 8 IO ports are enough to manage 4 stepper motors, very easy to use. This shield can make quick work for managing stepper motors in your project
Features:
- Uses removable Pololu A4988 compatible stepper drivers. (A4988, DRV8825 and others) (Not Included)
- Jumpers to set the Micro-Stepping for the stepper drivers. (Some drivers like the DRV8825 can do up to 1/32 micro-stepping )
- Compact design.
- Stepper Motors can be connected with 4 pin molex connectors or soldered in place.
- Runs on 12-36V DC. (At the moment only the Pololu DRV8825 drivers can handle up to 36V so please consider the operation voltage when powering the board.)
- GRBL 0.9 compatible. (Open source firmware that runs on an Arduino UNO that turns G-code commands into stepper signals)
- PWM Spindle and direction pins
- 4-Axis support (X, Y, Z , A-Can duplicate X,Y,Z or do a full 4th axis with custom firmware using pins D12 and D13)
- 2 x End stops for each axis (6 in total)
Fast Shipping and Professional Packing
We offer a broad range of shipping options owing to our long-running partnerships with UPS, FedEx and DHL. Our warehouse staff are expertly trained and will wrap your products according to our exact and precise specifications. Prior to shipping, your goods will be thoroughly inspected and secured. We deliver to thousands of customers each day across multiple countries. This is a sign of our determination to be the largest online retailer on the planet. The warehouses and centers for distribution are located in Europe and the USA.
Note: Orders that contain more than one item are assigned a processing period according to the item.
Before shipping, we will examine the items ordered thoroughly. Most orders are delivered within 48 hours. The delivery estimate is between 3-7 days.
Returns
Stock is dynamic. It's not completely managed by us, as we're involved with several parties such as the factory and our storage. This means that the actual stock could fluctuate at any moment. It's possible that your order could become unfulfilled after you place the order.
Our policy lasts for a period of 30 days. If you haven't received the product within 30 days, we are unable to offer the option of a refund or exchange.
Your item must be in its original packaging and in good condition. It must also not be used. It must also be returned in the original packaging.
Related products
shields and modules
shields and modules
shields and modules
shields and modules
shields and modules
shields and modules
shields and modules
shields and modules
MEGA Proto Prototype Shield V3.0+170ptsBreadboard Electroslab
shields and modules
shields and modules
JT308 125KHz USB Proximity Sensor Smart RFID ID Card Reader Electroslab
shields and modules
shields and modules
Mp3 Nondestructive Decoder Board Built In Amplifier Electroslab
shields and modules
shields and modules
shields and modules
shields and modules
shields and modules
DIY KIT 16 Channel 12-bit PWM/Servo Driver-I2C Interface-PCA9685 Electroslab
shields and modules
shields and modules
16-Channel 12-bit PWM/Servo Driver – I2C interface – PCA9685 Electroslab
shields and modules
ISD1820 Voice Board Module Recording WithTerminal Electroslab
shields and modules
shields and modules
shields and modules
DS1302 Real Time Clock Module CR2032 (Without Battery) Electroslab
shields and modules
shields and modules
shields and modules
shields and modules
shields and modules
Arduino Mega Sensor Shield V2.0 for MEGA 2560 R3 Electroslab
shields and modules
shields and modules
shields and modules
Micro SD Card Module Mini TF Card Read and Write 6pin (SPI) Electroslab
shields and modules
Servo Driver Module Shield 16 Channel 12-bitPWM I2C Interface PCA9685 Electroslab